2011年6月29日星期三

Panasonic apoia projeto Casa Container

Panasonic strengthens its commitment to the philosophy Eco Ideas - brand's commitment to sustainability, environmental protection and reduction of environmental impacts - and supports, in Brazil, the Container Project House. Designed by architect Daniel Corbas to be their home, the house uses only sustainable products that reduce the harm to the environment, including the refrigerator Invert D512 brand.

The project is to use as house structure, shipping containers and products considered green. The space is open for public visitation until June 29 in Fazendinha, residential condominium in the Granja Viana in Cotia, São Paulo. With 196m2 of built area, the container house is distributed over two floors.

Container's kitchen with fridge-D512 Panasonic To equip the kitchen Container House, the architect chose the refrigerator D512 multi-port that uses inverter technology developed by Panasonic to contribute to energy savings. During the night, the power consumption of coolant is reduced by 20%, being the period of low utilization. The multi-port is also a difference by providing better utilization of space and lower cooling loss prioritizing practicality of use in order of use of its ports.

SPARQ Systems Closes Financing

SPARQ Systems Inc., a developer of smart microinverters for photovoltaic (PV) power systems, has closed a new round of financing, raising $Subscriber content.

Kingston, Ontario based SPARQ Systems, a spin-off company of Queen’s University through PARTEQ Innovations, has developed an efficient and low-cost microinverter solution that produces more AC power from PV panels for longer periods under lower light and partial shadowing conditions.

SPARQ recently entered into a partnership agreement with Sanmina-SCI Corporation (NASDAQ: SANM) to manufacture new microinverters and communications hubs for solar photovoltaic (PV) systems for the consumer market. The solar inverters will be produced for the Canadian market at Sanmina-SCI’s Ottawa facility, which is certified for Ontario’s Feed-in Tariff (FIT) program, and at Sanmina-SCI’s worldwide regional facilities for global demand.

2011年6月26日星期日

Volume manufacturing of its devices by Celestica

In addition to expanding its manufacturing, the company plans to add to its sales support operations and to build its research and development teams for future products.

The company has posted openings for product managers and an information technology manager and engineers.

SolarBridge, which has raised $46 million to date, is a leading maker of advanced and efficient microinverters that improve the reliability of rooftop solar power systems, increase energy production and save costs by simplifying installation.

The company, which is expanding rapidly in Austin, expects to employ 75 people worldwide by the end of this year. It has announced partnerships with two major makers of solar panels, Kyocera Solar Inc. and SunPower Corp., and it expects to announce more partners soon. The first panels with its inverters installed should be available for sale this summer.

Volume manufacturing of its devices by Celestica, an international contract manufacturer, started in April at its factory in Dongguan, China.

CEO Ron Van Dell said SolarBridge operates in a segment of the solar power market that accounts for about $3 billion a year in global sales. Much of the industry's focus so far has been on how to make solar panels more cheaply and efficiently. But now, Van Dell said, industry attention is shifting to power inverters, which can be another area for improving savings and reliability.

The company, which licenses technical discoveries made at the University of Illinois, uses advanced power electronics to create an inverter that it says will work for 25 years or longer and "harvest" more than 95 percent of the energy produced by solar panels.

Enphase Energy filed to go public

Solar panel micro-inverters transform a direct current generated by the photovoltaic cell on the panel into an alternating current. The alternating current is fed into a power grid, which can’t accept a direct current. Micro-inverters are built into a single solar panel rather than an array of solar panels. As a result, the total electrical output of a solar array does not suffer when a single solar panel is damaged or in the shade.

Enphase Energy’s micro-inverters are compatible with about 80 percent of solar modules currently on the market.

Enphase Energy filed to go public and raise up to $100 million earlier this month. Like a number of other companies filing to go public this year, Enphase has not been profitable for several years. The company lost $21.8 million in 2010 and $16.7 million in 2009. It also lost $9.3 million in the first quarter this year, up from a loss of $3.7 million in the first quarter of 2010.

The company brought in $18.1 million in revenue in the first quarter this year, up 56 percent from $11.6 million in the first quarter of 2010. It brought in $61.7 million in revenue in 2010, up 205 percent from $20.2 million in revenue in 2009.

Enphase raised $63 million in its last funding round in July last year led by Kleiner Perkins Caufield & Byers. The company raised $22.6 million in a funding round in May 2009 and $6.5 million in January 2008. The company has raised a total of around $113 million to date.

Competitor SolarBridge also recently closed a $19 million funding round led by Rho Ventures and Battery Ventures. SolarBridge’s micro-inverters last around 25 years, compared to typical centralized power inverters that usually last around a decade. SolarBridge also includes a 25-year warranty on its micro-inverters. SolarBridge has raised round $46 million total after launching in 2004.

2011年6月22日星期三

Microinverters and Maximum Power Point Trackers

Inverters are the gateway to the grid – turning Direct Current electricity from solar PV systems to grid-friendly Alternating Current. Over the past several years, there’s been a revolution in inverter technologies that allow project owners to more effectively regulate system performance. One technology, the microinverter, is installed on the back of individual panels, turning each module into its own unit and providing real-time data on how each is operating. Therefore, if clouds roll over a PV system, the “Christmas tree light effect” is avoided, and each panel still functions normally, maximizing the output of a system – sometimes by 20% or more.

Speaking of maximizing output, that’s where Maximum Power Point Trackers (MPPT) come in. These pieces of power electronics are also installed on the back of individual panels. But they’re not microinverters; instead, they boost voltage to an optimal range for a central inverter, thus allowing the device to run more efficiently. By allowing a system owner to control a PV plant at the module level, you can boost performance on the module level and regulate voltage even as weather patterns change.

Wind Energy Management Tools

SCADA systems that remotely monitor wind farm performance have been around for years – but there are a host of new applications being developed that allow grid operators and utilities monitor system-wide performance in an easier, more compelling way.

The Wind Energy Management System from the Portuguese company Logica is a great example. The company manages over 3 gigawatts of wind farms in the U.S. and Europe using its WEMS, which allows for real-time monitoring of a set of geographically dispersed wind plants – providing the tools to balance voltage, ramp wind farms up and down quickly, and plan for maintenance.

A company like EnerNOC provides the tools for better management on the demand side; a company like Logica provides the tools for better integration on the supply side.

Virtual power plants combine intelligent demand response with supply-side management software, bringing distributed renewable energy plants together to form a “virtual” centralized resource.

We previously wrote about Germany’s Regenerative Combined Power Plant, a project that proved existing renewable energy technologies could provide 100% of the country’s electricity. The project blended three wind farms worth 12.6 MW, 20 solar PV plants totaling 5.5 MW, four biogas systems equaling 4 MW and a pumped storage system with 8.4 GWh of storage. By using geographically dispersed renewable resources that compliment one another, the plant operators were able to meet needs on the grid as supply and demand shifted. The project shows that with better information technologies and a balanced set of resources, the intermittency issue can be dealt with.

Top 5 Coolest Ways Companies are Integrating Renewable Energy into the Grid

Intermittent renewables at high penetrations will bring new challenges for the grid. But how big will they be? And is it true that wind and solar will necessarily need storage or natural gas back-up at high levels?

The International Energy Agency wanted to know, so it modeled a variety of high-penetration scenarios in eight geographic regions around the world. Hugo Chandler, a senior policy analyst with the IEA explains the organization’s findings to Climate Progress:

    Variability is not just some new phenomenon in grid management. What we found is that renewable energy is not fundamentally different. The criticisms of renewables often neglect the complementarities between different technologies and the way they can balance each other out if spread over certain regions and energy types.

    Grid operators are constantly working to balance available supply with demand – it’s what they do. There are always natural variations that cause spikes in demand, reductions in supply or create disturbances in frequency and voltage.Once you see there are a variety of ways to properly manage that variability, you start whittling away at the argument that you always need storage or a megawatt of natural gas backup for every megawatt of renewable energy.

Theoretical modeling is important. But what companies are doing in reality?

Here’s five of the top methods for integrating renewable energy into the grid – proving that intermittency isn’t the show-stopper that critics make it out to be.

Intelligent Demand Response

 Intelligent demand response is often called the “killer app” of the smart grid. Demand response is not a new concept – but the “intelligent” part is still somewhat new.

The demand-response leader, EnerNOC, is now applying this concept to renewable energy. The company announced earlier this year that it would work with a Northwestern transmission operator to help manage demand to meet the fluctuating output of wind electricity in the system. EnerNOC president David Brewster calls it “the perfect dancing partner for wind.” By ramping up demand at facilities during time of peak supply and lowering demand when supply drops off, the grid can respond to changing conditions in real time without the need for storage.

2011年6月19日星期日

The top five coolest ways to integrate renewable energy into the grid

Intermittent renewables at high penetrations will bring new challenges for the grid. But how big will they be? And is it true that wind and solar will necessarily need storage or natural gas back-up at high levels?

The International Energy Agency (IEA) wanted to know, so it modeled a variety of high-penetration scenarios in eight geographic regions around the world. Hugo Chandler, a senior policy analyst with the IEA, explains the organization's findings to Climate Progress:

    Variability is not just some new phenomenon in grid management. What we found is that renewable energy is not fundamentally different. The criticisms of renewables often neglect the complementarities between different technologies and the way they can balance each other out if spread over certain regions and energy types.

    Grid operators are constantly working to balance available supply with demand -- it's what they do. There are always natural variations that cause spikes in demand, reductions in supply, or create disturbances in frequency and voltage. Once you see there are a variety of ways to properly manage that variability, you start whittling away at the argument that you always need storage or a megawatt of natural gas backup for every megawatt of renewable energy.

Theoretical modeling is important. But what companies are doing in reality?

Here's five of the top methods for integrating renewable energy into the grid -- proving that intermittency isn't the showstopper that critics make it out to be. Explanations of each of these with videos are below.


Intelligent demand response is often called the "killer app" of the smart grid. Demand response is not a new concept -- but the "intelligent" part is still somewhat new.

The demand-response leader, EnerNOC, is now applying this concept to renewable energy. The company announced earlier this year that it would work with a Northwestern transmission operator to help manage demand to meet the fluctuating output of wind electricity in the system. EnerNOC President David Brewster calls it "the perfect dancing partner for wind." By ramping up demand at facilities during times of peak supply and lowering demand when supply drops off, the grid can respond to changing conditions in real time without the need for storage.

Microinverters and maximum power point trackers

Inverters are the gateway to the grid -- turning direct current electricity from solar photovoltaic (PV) systems to grid-friendly alternating current. Over the past several years, there has been a revolution in inverter technologies that allows project owners to more effectively regulate system performance. One technology, the microinverter, is installed on the back of individual panels, turning each module into its own unit and providing real-time data on how each is operating. Therefore, if clouds roll over a PV system, the "Christmas tree light effect" is avoided, and each panel still functions normally, maximizing the output of a system -- sometimes by 20 percent or more.

Speaking of maximizing output, that's where maximum power point trackers come in. These pieces of power electronics are also installed on the back of individual panels. But they're not microinverters; instead, they boost voltage to an optimal range for a central inverter, thus allowing the device to run more efficiently. By allowing a system owner to control a PV plant at the module level, you can boost performance on the module level and regulate voltage even as weather patterns change.